91视频免费在线,亚洲国产精品视频一区,夜夜爽av福利精品导航

噸袋廠家:在整個應用過程中，噸袋制造商和塑料編織袋的質量非常重要。

T-Bag manufacturer: in the whole application process, the quality of T-Bag manufacturer and plastic woven bag is very important.

如何確保塑料編織袋的質量？

How to ensure the quality of plastic woven bags?

塑料編織袋的質量應從生產開始就開始爬行。

噸袋廠家

The quality of plastic woven bags should start from the beginning of production.

以下噸袋制造商將讓您知道如何提高塑料編織袋的質量。

The following ton bag manufacturers will let you know how to improve the quality of plastic woven bags.

根據加工順序，縫制規格指定為±1CM，針跡長度為0.7- /針0.9厘米。

According to the processing sequence, the sewing specification is specified as ± 1cm, and the stitch length is 0.7 - / stitch 0.9CM.

請按照指定使用縫紉線。

Please use sewing thread as specified.

禁止重疊縫合線，肥料板泄漏，浮線，帶扣環泄漏，腋窩等。

Do not overlap suture, fertilizer plate leakage, floating line, leakage with buckle, armpit, etc.

左，右線松散且相同。

The left and right lines are loose and the same.

塑料編織袋的角度必須在10厘米以內。

The angle of plastic woven bag must be within 10 cm.

在主體和底端之間的連接處，應進行雙折比較，并縫制三根線。總寬度為2CM。禁止有明顯的皺紋。線和線是勻稱的，不是重合的，并且針被壓在針上。

At the connection between the main body and the bottom, double fold comparison shall be carried out and three threads shall be sewn. The total width is 2cm. No obvious wrinkles. The thread and thread are symmetrical, not coincident, and the needle is pressed on the needle.

提布，蓋布，菊花10CM×10CM，禁止除線，熱熔。

Jacquard, cover cloth, chrysanthemum 10cm × 10cm, no wire removal, hot melting.

縫制塑料編織袋的起始針必須在同一手術縫合線上重疊5CM停止針按壓針，將布針向上抬起于針的左上角，縫合距離為1CM，接縫原料袋為針側縫紉線結的長度不應超過1.5CM。

The starting needle for sewing plastic woven bag must overlap 5cm on the same surgical suture, stop pressing the needle, lift the cloth needle up to the upper left corner of the needle, the suture distance is 1cm, and the length of sewing thread knot on the needle side of the seam material bag shall not exceed 1.5cm.

禁止將吊帶背心，起重布和布進行交錯，接縫，接縫和接縫。

It is forbidden to stagger, joint, joint and joint the vest, lifting cloth and cloth.http://www.sdrysbzgs.com/article/detail/id/54.html